Controls (standard motor)
<<Back to Main Product Page

Standard Switch, SPDT maintained, 09.100.101

This is the standard switch that is included with all of our motorized products. This switch has a center-off position and is typically used to switch line voltage directly to the motor. This switch is UL listed and is rated for use at 120 VAC 15 amp. The switch is white and includes a white cover plate. Fits in a single gang box.

Technical Documentation

Key Switch, SPDT maintained, 09.100.102

This switch is used when tamper resistance is required. This switch has a center-off position and is typically used to switch line voltage directly to the motor. This switch is UL listed and is rated for use at 120 VAC @ 5 amp. The switch is black and includes a white cover plate. Fits in a single gang box.

Technical Documentation

Key Switch, SPDT momentary, 09.100.103

This switch is used when tamper resistance is required. This switch has a center-off position and is typically used with our low voltage control module but can also be used for switching line voltage directly to the motor. In low voltage applications multiple switches can be parallel connected for control from multiple locations within the room. This switch is UL listed and is rated for use at 120 VAC 5 amp. The switch is black and includes a white cover plate. Fits in a single gang box.

Low Voltage Switch, momentary, 09.100.104

This switch is for low voltage use only and is used with our low voltage control module. It has three momentary push buttons and can be parallel connected for control from multiple locations within the room. This switch is rated for use at 24 VDC 0.5 amp. The Decora style switch is white and includes a white cover plate. Fits in a single gang box.

Low Voltage Control Module, (IR) 09.101.100

The Low Voltage Control Module is used when it is necessary to interface with an external control system via momentary contacts or IR remote control. Features a port for connecting an optional, externally mounted IR receiver and a terminal block for connecting low voltage momentary contacts. Terminal blocks are provided for connecting AC power and motor. Includes a white cover plate and fits in a 2 gang box. UL listed.

IR Remote Control Set, 09.102.100

This set includes all of the necessary components for low voltage control via an IR transmitter and a low voltage switch.

IR Transmitter, 09.102.101

Replacement component. This is the same IR transmitter included in the IR Remote Control Set.

IR Receiver, 09.102.102

IR Transmitter, 09.102.101

Replacement component. This is the same IR transmitter included in the IR Remote Control Set.

IR Receiver, 09.102.102
Replacement component. This is the same IR receiver included in the IR Remote Control Set.